Views: 30 Author: Site Editor Publish Time: 2022-06-01 Origin: Site
Polishers, also called grinders, are typically used for mechanical grinding, polishing, and waxing. I hope these instructions on polishing machines are helpful to you.
How a polishing machine works.
The company has polishing machines.
The polishing machine is a power tool, the polishing machine is made up of basic components such as the base, throwing disc, polishing dust, polishing cap and cover. The key to the operation of the polishing machine is to try to achieve the maximum polishing speed to remove the damaged layer produced during polishing as quickly as possible. It is also necessary to ensure that the polishing damage layer will not affect the final fabric observed, i.e. it will not create a false fabric. The former requires the use of coarser abrasives to achieve a higher polishing speed to remove the polishing damage, but the polishing damage is also deeper; the latter requires the use of the finest materials so that the polishing damage is shallow but the polishing speed is low.
The best way to resolve this contradiction is to divide the polishing process into two phases. Coarse polishing is to remove the layer of damage caused by polishing, this stage should have the maximum polishing speed; the formation of surface damage by coarse polishing is a secondary consideration, but it should also be as low as possible; followed by fine polishing (or final polishing), the purpose is to remove the surface damage generated by coarse polishing, so that the damage caused by polishing is minimized. For polishing machine, the grinding surface of the specimen and the polishing wheel should be absolutely parallel and evenly pressed lightly on the polishing wheel, be careful to prevent the specimen from flying away and the pressure is too strong and causes new grinding marks. At the same time, should also let the specimen rotate and move back and forth along the radius of the direction of the turntable to avoid local wear on the polishing dust is too fast in the polishing process to add the micropowder suspension constantly, so that the polishing dust to maintain a certain level of moisture. Moisture will be too great to weaken the polishing of the abrasive roller, so that the hard phase in the sample showing the convex drive and non-metallic inclusion in the steel and cast iron graphite phase produced "dragging" phenomenon; moisture is too low, due to the friction heat will make the sample heating, the lubrication roller is reduced, the grinding surface loss of luster, and even black spots, discarded light alloy will be rolled surface.
Delin Intelligent was established in Nan'an, the hometown of plumbing in China in 1998.
Our main products are series casting machines: automatic forming machine, complete set of sand processing equipment, open forming line, low pressure casting machine, gravity casting machine, induction furnace, automatic core shooting machine, CNC composite processing machine, robot grinding and polishing machine, metal polishing machine, etc.
Our polishing machines mainly include six-axis four-station CNC polishing machine, robot polishing machine, robot polishing machine, robot grinding and polishing unit, six-axis dual-station CNC polishing machine, barrel grinder, drag-type grinding and polishing machine, etc.
If you are satisfied with our company's polishing machine, you can directly order or consult related questions about the polishing machine. We will provide you with the best polishing machine products and services and look forward to your visit.
